ISLABIKES Icons Jimi, Owner'S Manual

Page: 16 / 24

Icons - Jimi
Disc brakes
One of the most important safety features of your Islabike. It is a good habit
to check the brakes on a regular basis. This should be done depending on
the type, frequency or duration of riding. If your bike has not been used for
a period of time, we recommend a quick check before riding.
Brake operation – Pull on one brake at a time and look at the brake pads.
Check to see if they are touching the discs evenly when applied. If the pads
are not contacting the discs correctly, they are uneven, rubbing or feel spongy
to apply please contact our technical support team on +44 (0)800 008 6297
or email techsupport@islabikes.co.uk.
Brake pad wear and replacement – Brake pads do not last forever.
Eventually they will need replacing. This will depend on the type, frequency
and duration of riding. Brake pads must be replaced if the total thickness of
the backing plate and pad friction material is less than 3mm.
Riding with backing plate and pad friction material less than 3mm
can result in reduced braking performance, crash, and/or death.
Pads fitted as standard are organic compound. We recommend
replacing with the same compound to maintain performance.
Brake fluid and replacement – The brakes fitted to your bike contain
DOT 4 hydraulic fluid. Your fluid will need replacing annually to maintain
performance. Always seek professional advice – specialist tools are
required for this maintenance.
DO NOT ALLOW brake fluid to contact skin or eyes. If fluid comes
into contact with skin or eyes seek to dilute with plenty water and
seek medical advice.