TranzIt USB
3. Installation (cont.)
B. Connector Mounting Options
3b. Connector Mounting Options
* Some radios require the addition of antenna connection adapters
3.5mm
Audio Input
UNDER-DASH MOUNT
(use of bracket)
•Easy installation
•Strong Support
PANEL MOUNT
(use of faceplate)
•Stylish finish
•No unnecessary drilling
CUSTOM MOUNT
(separate cables)
•Any order, Any place
•Easy to secure individually.
MOUNTING OPTIONS
Specific USB Cable
for Your Device
(Not included)
USB Power Cable
Audio
ON/OFF Switch
music player
Antenna Out
to FM radio*
Antenna Input
from vehicle antenna*
2.5mm Connector
3.5 mm to 3.5 mm Audio Cable (4 ft.)
“Factory Look” 3.5 mm Dash Panel Mount Audio input (6 ft.)
3/8”
* Antenna Adapter May Be Required
Under Dash Mount (using bracket)
• Choose suitable mounting position under dash
• Install the bracket using two screws
• Mount audio connectors to faceplate
• Mount USB connector by carefully removing the fuse and passing
the fuseholder through the middle of the USB mounting hole
• Attach faceplate to bracket
• Install connectors to the
Radio Input Interface
Face Plate Mount (using faceplate)
• Choose suitable mounting position on dash
• Confirm the proper hole position by using the
“Panel Mounting Template” (page 5)
• Mark the mounting holes
• Drill the mounting holes
• Attach the mounting panel with small screws
• Mount audio connectors to faceplate
• Mount USB connector by carefully removing the fuse and passing
the fuseholder through the middle of the USB mounting hole
• Install connectors to the
Radio Input Interface
Individual (in-dash installation)*
• Choose suitable mounting position on dash
• Carefully measure and drill holes for installation
• Mount audio connectors
• Mount USB connector by carefully removing the fuse and passing
the fuseholder through the middle of the USB mounting hole
• Install connectors to the
Radio Input Interface
* Some radios require the addition of antenna connection adapters
3.5mm
Audio Input
UNDER-DASH MOUNT
(use of bracket)
•Easy installation
•Strong Support
PANEL MOUNT
(use of faceplate)
•Stylish finish
•No unnecessary drilling
CUSTOM MOUNT
(separate cables)
•Any order, Any place
•Easy to secure individually.
MOUNTING OPTIONS
Specific USB Cable
for Your Device
(Not included)
USB Power Cable
Audio
ON/OFF Switch
music player
Antenna Out
to FM radio*
Antenna Input
from vehicle antenna*
2.5mm Connector
* Some radios require the addition of antenna connection adapters
3.5mm
Audio Input
UNDER-DASH MOUNT
(use of bracket)
•Easy installation
•Strong Support
PANEL MOUNT
(use of faceplate)
•Stylish finish
•No unnecessary drilling
CUSTOM MOUNT
(separate cables)
•Any order, Any place
•Easy to secure individually.
MOUNTING OPTIONS
Specific USB Cable
for Your Device
(Not included)
USB Power Cable
Audio
ON/OFF Switch
music player
Antenna Out
to FM radio*
Antenna Input
from vehicle antenna*
2.5mm Connector
* If you choose to mount the cables via the individual connector mounting
holes some drilling adjustments maybe needed depending on the material
and drill bit being used.
- 3.5mm audio input: 3/8” drill bit
- USB charging input: 3/4” drill bit
- Audio Switch ON/OFF: 9/16” drill bit
* Some radios require the addition of antenna connection adapters
3.5mm
Audio Input
UNDER-DASH MOUNT
(use of bracket)
•Easy installation
•Strong Support
PANEL MOUNT
(use of faceplate)
•Stylish finish
•No unnecessary drilling
CUSTOM MOUNT
(separate cables)
•Any order, Any place
•Easy to secure individually.
MOUNTING OPTIONS
Specific USB Cable
for Your Device
(Not included)
USB Power Cable
Audio
ON/OFF Switch
music player
Antenna Out
to FM radio*
Antenna Input
from vehicle antenna*
2.5mm Connector
Note: Depending up on installation, some glue may be required to properly
secure the mounting pieces.
