ISIC DuraMON 7, User Manual, Page: 4 / 20

1
Features
Congratulations on your purchase of a DuraMON 7”. This short form manual is designed to get
you started working with your new DuraMON 7”.
The DuraMON 7” series of Panel Computers are all designed for the demanding operating
conditions at sea.
The DuraMON 7” series are tested for full compliance to marine-standards IACS E10 and IEC
60945.
The DuraMON 7” comes with excellent brightness and contrast levels that, together with wide
viewing angles, ensure a good readability thus making it very eye-friendly. For the best picture
quality, always use a double shielded DVI or VGA cable with ferrites, like the one supplied with
the unit.
2
General considerations on Installation and
Operation
The DuraMON 7” is designed to work at conditions according to IEC 60945. However, keeping
the temperature and vibration level at a minimum will extend the life time of the product. ISIC
recommend operating this product at normal room temperature (20-25 °C), with the lowest
level of vibration and humidity.
Installation of the DuraMON 7”
In order to obtain the best possible operating conditions, please note the following precautions.
- Room for cooling.
When designing the cabinet/console for the DuraMON 7”, please ensure that air can
flow freely around the cabinet, in order to avoid any unnecessary rise in
temperature. If it is not possible to have an adequate natural airflow, use a fan to
force the airflow to be higher.
- Mounting positions
The DuraMON 7” is designed for both horizontal and vertical installation.
- Sunlight
Avoid direct sunlight to keep temperature low by that improve lifetime.
User Reference Manual – DuraMON 7” series
PN: 07009-000 Rev A Page 4