User Reference Manual - DuraMON
PN: 04173-000 Rev C Page 8
4
DuraMON front panel controls
The front panel is illuminated and will be dimmed continuously depending on changing of
backlight brightness.
By opening the USB hatch on the right side of the user interface an USB access becomes available.
After use simply close the hatch and the sealing is regained.
ON/OFF
INPUT
MENU
UP
DOWN
ENTER USB hatch
ON/OFF:
This key is used to turn the product on or off. Pressing it will turn the power on, while holding it
pressed will turn the power off. The light in the button will change from blue to red to indicate it’s
powered down. It is important to notice that, when powered off, the product still consumes some
power from the mains. To cut off the power from the product it is necessary to unplug its power
cord from the mains.
If there is no active signal, the monitor will go to suspend mode until an active signal is detected.
While the monitor is in suspend mode, the blue light will blink in the ON/OFF button.
INPUT:
By pressing the INPUT key the Main Picture Channel Selection will appear. See Main Picture Channel
Selection section for details.
MENU:
Pressing this key the Popup menu will appear. See Popup Menu section for details.
UP/DOWN:
Used to adjust backlight or to navigate and adjust settings in menus.
ENTER:
This key is used to confirm and to enter the advanced OSD by pressing ENTER and thereafter MENU
while holding ENTER pressed.
