ITA Series – Table Top Precision Weighing Balance
ITA Series – Table Top Precision Weighing Balance
4. CONTROLS & FUNCTIONS
SYMBOL
NAME
FUNCTION
· To power on and off the machine.
· Switch to piece counting mode .
· Long Press – Initiate the Print Command.
· A uto zero setting - Press, Hold the
Counting b u t t o n a n d s w i t c h o n t h e
machine.
· Call Price Calculation function.
· Switch to scroll & sleep mode setting- press
Hold the Price button and switch on the scale.
· Long Press – Enter price of current
gold rate to use for price calculation .
· Switch between weighing units.
· Up Shift to change option of selected digit.
Ex change 0 to 1 to 2 to 3 etc.
· Switch to Internal Count Mode. Hold the
M button and switch on the machine.
· Tare the weight kept on the pan.
· Right, Left shift the selected digits during cal
or other setup modes.
· Manual Accumulation.
· Auto Zero Setting – Press, Hold the Tare
button and switch on the machine.
· Zero the weight kept on the pan.
· Enter Key – Accept the selected setting and
exit from setting mode.
· Press and hold the ZERO button after keeping a
known weight calibrates the scale.
Power Key
Counting /
Print Key
Function /
Left Shift Key
Mode /
Up Shift Key
Tare /
Right Shift Key
Zero /
Enter Key
6.5
RANGE SELECTING :
This
function can enable or disable the
dual range setting of your scale
that is you can select the range of
the scale as DOUBLE or SINGLE.
For e.g. If the sale’s Capacity is
600g with Accuracy of 10mg and
the range is selected as Double
then the scale will show the
Accuracy of 5mg upto half the
original capacity. i.e. 300g and
above that it will show the
Accuracy of 10mg upto 600mg.
And if the range is selected as
SINGLE then the scale will show
its original Accuracy i.e., 10mg from 0 to 600g. For selecting a
particular range, Press and Hold the MODE button and switch on the
scale display will show “CAP” press the Zero button 6 times and the
display shows “RANGE” now press the Zero button once and select
between single (SIN) or Double (DBL) range by pressing the Tare button
and then press the Zero button once to accept the range selected.
6.6
DUMMY ZERO SETTING :
Press
and hold the Tare button and
switch on the sale. Display shows
“DUMMY 0”. Now press the Zero
button once and the display
shows the pre selected option
i.e., YES or NO, Now you can
select between the YES or NO option by pressing the TARE button and
press the Zero button to make your option accepted.
10
3