ISHIMA Rave M1.0R, Instruction Manual

Page: 3 / 36

3
This radio controlled model is NOT a toy. Is is recommended that children under the age of 16 are under adult supervision when oper-
ating an RC model.
It is important that you read and respect the instructions of this handbook. You alone are responsible for this model’s safe operation,
therefore you should take enough safety precautions prior to operating this model.
Check all the screws before using, use Nut-Lock if necessary. Check the screws and motor position every tank refill. Only use special
nitro fuel for RC car models.
Never drive the car without the airfilter or with a dirty or defective airfilter.
Length 485mm
Width 305mm
Height 160mm
Weight 3400g
Cut off excess with a wire cutter
I. Safety precautions
II. Rave model dimensions
III. Symbols used in the manual
R/H Screw (Round Head screw)
Set Screw
E-clip
Nylstop nut
METRIC SIZE
F/H Screw (Flat Head screw)
Apply grease
Apply NutLock to the indicated screw or nut
Apply cyano glue (instant glue).
Apply silicon oil (look closely at the bottom of the page
which type of oil is needed!)
Apply special air-filter oil
Assemble left and right sides the same way
Assemble as many times as specified
Bags are only delivered with RAVE R & RAVE RR kit version
Screwbag
RVB-S141
NBR O-Ring set
RVB-S189
E-Clip bag: RVB-S141
BAGS