AC-4000 Series Operator’s Manual No. 0199B
Page 11
1
PRODUCT OVER
VIEW
5
With the stopper lever lying flat, load a new label roll on the roll holder.
Note: Before loading the label roll, remove approximately 12 inches (30 cm) of labels from the end
of the roll.
12 inches
(30 cm)
6
Pull up the stopper lever, and then slide it in or out depending on the width of the roll.
Do not move the lever in too far which could bind the label roll.
7
Thread the label paper along the path from (1) through (4).
