DRAFT
TrackMan™ Installation and Operating Manual
Rev. 1.0, October 2004
Page 16 of 20
4 End of use
When terminating a session with the TrackMan™ system, please follow these steps:
1.
Exit the TrackMan™ application software
2.
Turn off the motor switch of the TrackMan™ Radar Unit
3.
Turn of the power to the TrackMan™ Radar Unit
4.
Disconnect the cables to the TrackMan™ Radar Unit, by pulling the connector out.
5.
Push the two motorized legs into the box by giving the TrackMan™ Radar Unit a
small knock on the top. Push the legs in as far as you can.
6.
The backside leg is pulled out and up. Be careful not to get a finger caught when it
snaps into place. Now the TrackMan™ Radar Unit is ready for stow.
Make sure that the TrackMan™ Radar Unit and DU are wiped dry, and that any mud and dirt
is removed. The system will not be damaged by water, mud or dirt, but to extend the
appearance and life time of the TrackMan™ Radar Unit it is advisable.
