Made For Responsible Luxury
2
www.isenbergfaucets.com
2
3
INSTALLATION PROCEDURE
1
Cut a section of floor to
run the pluming as
shown in the diagram.
Ensure that the cut out is not
accidentally bigger than the
size of the escutcheon plate
100mm to 120mm
CUT OUT DIMENSIONS
20mm
0.787''
30mm
1.181''
H
C
The distance between the center point of the valve
inlet (hot, cold) to the floor and top of the valve is
shown above. Level the valve before securing to
the floor. The connections for Hot & Cold water
supply lines are shown in the diagram
1
2
3
Mark holes for floor bolt installation. Install valve
using bolts (1). Secure head bolts with washers (2)
and nuts (3). Ensure valve is perfectly level.
