background image

  

In  some  countries/states  the  exclusion  or 
limiting  of  indirect  or  consequential  damages 
or  the  limiting  of  the  duration  of  warranty  is 
not  allowed.  In  this  case  the  previously  men-
tioned limitations and exclusions do not apply 
to you. 

 

Products  manufactured  and/or 
sold  (herinafter  products)  by 
iSEMcon  GmbH  and/or  iSEMcon 
LLC,  (hereinafter  iSEMcon)  are 
not designed for use as a compo-

nent  in  any  life  support,  life  safety,  or  other 
comparable  application.  Our  products  should 
not be used in any application where the fail-
ure  or  faulty  performance  of  the  product 
might create a risk of personal injury or death. 
Buyer  assumes  all  risk  of  loss,  damage  or  in-
jury alleged to arise from the failure or faulty 
performance  of  an  iSEMcon  product  in  any 
unauthorized  application.  Buyer  agrees  to 
indemnify and hold harmless iSEMcon, and its 
directors,  employees,  agents,  representatives 
and sales  partners, from and against any and 
all  claims,  costs,  damages,  losses  and  ex-
penses  including  attorney  fees  which  arise 
from  or  are  alleged  to  have  been  caused  by 
any  claim  for  personal  injury  or  death  con-
nected  with  buyer's  use  of  an  iSEMcon  prod-
uct in any unauthorized application, including 
claims  which  allege  that  iSEMcom  has  been 
negligent  in  connection  with  the  design  or 
manufacture of the product. 

Safety clause and unauthorized 
applications

 

Summary of Contents for EMX-7150

























Reviews: