RDH-XS, RDH-S, RDH-M, DSH-S
7 / 44
April 2019
Operation
(applies only to products supplied with a motor and a suitable motor output stage or a suitable
controller, e.g. a single-axis controller)
Only if the product is assembled correctly and the motor, the tactile or inductive limit switches, the brake
and the incremental measuring system (encoder) are correctly connected to the motor output stage/con-
troller all further operations can be successful. Next operations are parameterization, commissioning
and operation/programming of the product as a fully-functioning drive system.
The technical details of special versions may differ from the following versions.
If the product malfunctions or you are unclear about its operational status, you should consult the rele-
vant operating instructions/assembly instructions.
https://www.isel.com/en/support-downloads/manuals.html
Here you will find instructions and information on how to check the functions you require, remove the
causes of a possible malfunction or have these removed.
You must always carry out the instructions you find completely and correctly in order to ensure the
product functions correctly.
Never allow children or other persons who are vulnerable or at risk to operate the product unsupervised.
If you are still unclear about its operational status, it is highly recommended that you consult isel Ger-
many, quoting the type and article number or serial number.
