isel
- CAN - I/O
– Modules: Operating Instruction
Page - 20
Follow the commands to get the USB-IO device into the modul management:
Choose in the tree view the IO-Modul which is not in use and name it e.g
”CAN-IO-
16/16 Node address is 16" or only "CAN IO".
Click on ">>" next to the Edit field "Modul DLL". Choose the "IoCan.DLL" in the
"\CNCWorkbench\Control\Can" directory. The Edit field "Modul initialisation file"
shows automatically the “CNCWorkbench\Control\Can\IoCan.INI" file. You don’t
need to rename the file.
Click on button
(in case nothing will happen, choose another IO-
Modul from the tree view and after that choose the IO-Modul for the CAN-IO).
Click on
to open the Setup dialog.
In this dialog
you can set
different
settings for the
module. The
most important
setting are the
node address
of the module.
The default
value for the
address is 16.
Furthermore
you can set
initialization
values for
digital and
analog output
ports. If you
start the
software
(ProNC /
Remote) these
values will be
set.
