9
isel
-flat bed installation GFV
5.2
Transportation
Remove the transport safeguards at the rack feet.
Use only suitable lifting devices (fork-lift truck, lifting truck, see figure). Only raise the
machine from below. Do not pull it up at the cover.
During a later transportation, please ensure that the voltage supply and connection cables are
not damaged. Remove all cables before any transportation or transport machine and penguin
simultaneously, e. g. on one pallet.
Above all, always keep the three triagular key outside of the machine during
transport.
5.3
Setting-up
Ex works, the worktable and all axes are exactly aligned right-angled.
Never loosen the fastenings of the axes or the angular brackets. Otherwise, you must re-
adjust the axes again.
