iseg EHS 40100p, Technical Documentation Manual

Page: 7 / 42

Table of Contents
Document history 2
Disclaimer / Copyrights 2
Safety 3
Description of the safety instructions 3
Intended use 4
Qualification of personnel 4
General safety instructions 4
Important safety instructions 5
1 General description 8
1.1 EHS Standard series 8
1.2 EHS High Precision series 8
2 Technical data 9
2.1 EHS Standard series 9
2.2 Technical data: EHS High Precision series 13
2.3 Options 17
3 Handling 17
3.1 Connection 17
3.2 Module status 18
3.3 Hardware Limit 18
3.4 Safety Loop 18
3.5 Delayed Trip 18
3.5.1 Operating principle 18
3.5.2 Limitations 19
3.5.3 Modules with two current measurement ranges 19
4 Options 20
4.1 VCT (for EHS CFG) – voltage correction by temperature 20
4.1.1 Technical data 20
4.1.2 Operation 20
4.2 Single Channel Inhibit (IU, ID, NIU, NID) 22
4.3 SLA – Active safety loop 23
4.4 SLP – Internally powered safety loop 23
4.5 1CR – One current measurement range only (HP series) 23
4.6 F02 – High floating voltage 23
4.7 F20 – Very high floating voltage 23
4.8 TC – Lower temperature coefficient 23
4.9 VLN 23
5 Front panel versions 24
6 Dimensional Drawings 26
7 Connectors and PIN assignments 36
8 Accesories 39
9 Order guides 39
10 Appendix 40
11 Glossary 41
12 Warranty & service 42
13 Disposal 42
14 Manufacturer contact 42
EHS High Voltage Power Supply series | Last changed on: 16.01.2020 |
www.iseg-hv.com
7/42