Call:
1300 664 257
Email:
Order:
www.iseekblinds.com.au
Step 3 - Fitting the blind inside the pelmet
•
Before inserting the blind into the bracket – make sure the
P1 button is facing the front - you will need to access and
push this button when you pair your motor to the remote.
•
Have another person assist you when placing the roller
blind into the brackets - keep the blind level.
Do not to
tip the blind down at the motor end - it may slip out and
become damaged
.
•
Ensure you unroll the fabric down (approx 20cm) before
you install so that when you are testing the up or down
direction of the motor you have room for the roller blind to
go up if required.
•
Install your blind into the male bracket first which is also
the motor end.
•
Hold the motor end in position and move to the other end
of the blind. Guide the spring-loaded pin into the track of
the female bracket until it clicks into position.
•
The blinds should never be ‘forced’ into the brackets. If
you have measured correctly, the blind will simply click
into position.
•
Once the blind is installed it should have 1.5 mm - 2mm
movement from left to right between the brackets (the
‘float’). If there is no float, your blind will not run smoothly
– so adjust your brackets accordingly for secure fixing.
•
Alternatively, you can adjust the pin end for more reach if
required.
•
Your pelmet and blind are now fully installed.
If you are unsure about any step of the installation
process, please remember we have online videos to
walk you through each step.
Visit
iseekblinds.com.au
and let Michael show you just
how easy DIY can be!
Remember - You are not alone. We are here to help.
If you have any challenges during installation, please give us a
call on 1300 664 257 or send us a Quick Enquiry online.
One of our expert team members will work with you to achieve
the stunning results you deserve.
