5
2
．
3 Function
Below is a brief introduction of high speed PTZ camera main function, achievement and operation
principles of each function, does not involve a specific method of operation.
1. Setup address code, baud rate, control protocol
Any operation commands has camera address code, baud rate and control protocol, any single
camera only respond to its own address code, baud rate, control protocol command. The detailed setup
ways of camera address code, baud rate and control protocol please refer to DIP switch settings.
2
．
Tacking
User can use the keyboard joystick to control the camera turning up, down, left or right, Can be used
to track moving targets or moving horizon, in addition you can change the eyeshot size and image size by
adjusting the focal length. In the auto-focus state, with the lens rotation, the camera will automatically
quickly adjust according to scenery change, instantly get a clear picture.
3
．
Focal length / rotation speed automatic matching technique
Manual adjustment, in long focal length situation, high speed reflect makes image quickly move
when a slight touch of joystick, resulting a data loss. Based on a humanized design, the PTZ camera can
automatically adjust horizontal and vertical rotation speed according to focal length, so that manual
operation is simple and easy to track targets.
4
．
Auto Invert
The operator pull the lens to bottom (vertical) and still hold the joystick, lens auto horizontal overturn
180°then downward overturn 90°,direct see the back of scenery, achieve vertical 180°full continuous
monitoring.
5
．
Setup and CALL presets
Preset function means speed dome can store horizontal and tilt angle of platform as well as camera lens
focal length and other parameters in memory, you can quickly CALL these parameters and adjust platform
and camera to the location. User can easily and quickly control equipment to storage and CALL preset via
keyboard and IP controller, this high speed PTZ has 256 presets.
6
．
Lens control
1
）
Focal length control
User can adjust the focal length via keyboard and matrix, in order to receive the necessary panoramic
images or micro-lens image.
2
）
Focus control
System default auto-focus, zoom, camera lens will automatically focus to the centre of scene, keep
