23
care
To access the filter simply push the dimple on the
filter cover to open the door as indicated by the
arrow in Diagram 1.
After You have opened the filter cover as shown in
Diagram 2 you can pull out the “drain down” hose
and empty any residual water from the machine
by holding the hose over a bowl or dish and pull-
ing the grey stopper from the end.
This is a useful safety feature that allows you to
also drain the machine down manually should the
machine fail to drain for any reason.
The filter can then be removed by simply un-
screwing it.
Once the filter is removed you will be able to see the blades of the drain pump and
you can see if these are clear with no objects blocking them or impairing their way.
The filter should be clear of all objects and any fluff, coins, pins or any other materi-
als should be removed to prevent damage or a failure to drain.
WARNING!
Always remember to place towelling on the floor to catch excess water!
Please note that damage caused by foreign objects or faults arising from these
being present may not be covered by your warranty.
Pump Filter
The filter is located at the bottom right hand side of the front panel of the machine
behind the filter door and can be easily accessed for cleaning. Please remember to
clear this on a failry regular basis as small items such as coins and pins inadvertantly
left in pockets will end up here. However it is vital that pockets are checked as items
left in clothing can cause severe damage to the machine and any damage may not
be covered by your warranty if it is caused by external objects.
There is also a “drain down” hose here that can be used to ensure that the machine
is empty before you open the filter or to drain the machine down should the drain
function fail to work for some reason.
WARNING!
Failure to clear the filter on a regular basis can cause drainage and or noise
problems that may not be covered by your warranty!
Diagram 1
Diagram 2