Super rinse
Use the Super Rinse option if you want to increase
the number of rinses. The maximum number of
rinses is seven, and the number of rinses varies
depending on the selected programme.
Recommended for persons with extremely
sensitive skin and/or in areas with very soft water.
This option cannot be selected with Rinse or Spin
& Drain.
• Select Super Rinse by pressing the button
under the symbol.
• An LED next to the button lights when this
option is activated.
Delayed start
When you select Delayed Start, the machine will
start 1-24 hours after you press the Start/Stop
button.
• Press the button by the symbol to activate
Delayed Start.
• By pressing the button again you can delay the
start in whole hours up to a maximum of 24
hours.
• Press Start/Stop, and the machine counts
down 1 hour at a time and starts after the
selected delay.
If you change your mind and want to cancel
Delayed Start, you must press and hold Start/Stop
for three seconds.
NOTE!
Remember to press the Start/Stop button to start
the programme.
NOTE!
Make sure the detergent compartment is
completely dry before you add detergent,
otherwise there is a risk that the detergent will
clump before the machine starts.
7
Close the washer door and
press the Start/Stop button
Time remaining
When the programme starts an estimated
programme time, in hours and minutes, is
displayed. The remaining time is updated three
times during the programme, based on the actual
load and the incoming water temperature. The
first update takes place after about 15 minutes.
The remaining time is last updated just before the
final rinse.
To add or remove washing after the
program starts
If you want to add or remove items after the
programme has started, you can stop the
programme by pressing and holding the Door
opening button (key symbol) for three seconds.
The programme time flashes on the display. When
you restart the machine, add any extra detergent
needed and close the washer door. The machine
continues automatically from the point where the
programme was interrupted.
Stopping or changing a programme
You can stop a programme by pressing the
Start/Stop button for three seconds. To restart the
machine, select a new programme, add any extra
detergent needed and press the Start/Stop button.
NOTE!
Do not open the detergent compartment while
the machine is running.
16
Washing
