Information for electricians
Installation and electrical connection
DANGER!
Electric shock if live parts are touched in the
installation surroundings.
Electric shock may lead to death.
Isolate before working on the device.
Cover up live parts in the vicinity!
!
!
Installation Guide
ise smart connect KNX Hue
Order no.: 1-0002-003
ise Individuelle Software-
Entwicklung GmbH
Kaiserstraße 14
26122 Oldenburg
Germany
T +49 441 680 06 12
F +49 441 680 06 15
www.ise.de
[email protected]
1
2
3
4
5
6
7
KNX
24 V DC
ise smart connect KNX
24VDC
KNX
8
APP
COM
Hue
Phy.Addr.
00:00:00:00:00:00
1-0002-003
ise smart connect KNX Hue
Safety instructions
Installation and mounting of electrical devices may only
be carried out by qualified electricians.
Failure to observe the instructions can result in damage
to the device, fire or other dangers.
These instructions are part of the product
and must stay with the customer.
Device design
ise smart connect KNX Hue
1. Programming button
2. KNX connection
3. External power supply connection
4. Programming-LED: red
5. APP = Indicator used for the state of the application
6. COM = Traffic (KNX and IP) communication indicator
7. Network connections
8. microSD-card (no function
)
Function
System Information
This device is a product of the KNX system and complies
with the KNX guidelines. Detailed specialist knowledge
gained in KNX training courses is assumed for
understanding.
Functionality of the device is dependent upon software.
Detailed information about software versions, specific ranges
of functions and the software itself can be found in the
manufacturer's product database. Planning, installation and
start-up of the device is with the aid of KNX-certified
software. The up-to-date product database and technical
descriptions are available on our internet page.
Proper use
With the KNX system, the innovative KNX adapter lets you
control up to 25 Hue lights via dimmer or switch. From warm
to lively, the lamps’ LED technology opens up the wide
spectrum of light hues. Individual RGB values can be set for
each individual lamp. The KNX control element lets you
choose comfortably between complete light scenarios and
separate control.
Product features:
·
control up to 25 Hue lights via ise smart
connect KNX and the Philips Hue-bridge
·
separately control up to 25 Hue lights via
dimmer or switch
·
individual control of RGB colour hues
possible
·
choose comfortably between complete light
scenarios and separate control
·
simple connection of visualisation systems
and facility management systems
·
For the latest version of the ETS 4 or ETS 5
Mounting the device
Observe the temperature range. Ensure sufficient
cooling.
·
Snap the device onto a top-hat rail according
to DIN EN 60715. See the illustration for
installation position.
·
Connect the external power supply to the
connection terminal (3). We recommend:
use the white-yellow connection terminal.
·
Connect the KNX line with the red-black
bus terminal (2).
·
Attach the cover cap over the KNX/external
power supply connection.
·
Connect the network connection to the
RJ pin jack with the RJ45 plug (7).
Attach the cover cap, figure 2
A cover cap must be attached to protect the
bus connection from dangerous voltages in
the connection area.
·
Guide the bus line to the rear.
·
Attach the cover cap over the bus terminal
until it engages.
Remove the cover cap, figure 3
·
Press the cover cap on the sides and remove.
Start-up
·
Briefly press the programming button (1).
Programming LED (4) lights up red.
·
Assign the physical address.
Programming LED (4) goes out.
·
Label the device with the physical address.
·
Load the application software, parameters etc.
Appendix
Technical data
KNX medium
TP1
Start-up mode
S-Mode (ETS)
KNX supply
DC 21…30 V SELV
KNX current
typ. 2,5mA
consumption
KNX connection
Bus connection terminal
External supply
DC 24...30 V
Voltage
Power consumption
2 W (with DC 24 V)
Connection
Connection terminal
IP communication
Ethernet 10/100 BaseT
(10/100 Mbit/s)
IP connection
RJ45 pin jack
Ambient temperature
0 °C up to +45 °C
Storage temperature
-25 °C up to +70 °C
Installation width
36 mm (2 HP)
microSD-card
no function
Figure 2
Figure 3
Warranty
We provide a warranty in accordance with the statutory
requirements.
Please send the device postage paid with error description
back to us.
ise Individuelle Software-
Entwicklung GmbH
Kaiserstraße 14
26122 Oldenburg
Germany
Figure 1
D
GB