Workrite Ergonomics | 800.959.9675 www.workriteergo.com
3 of 8
Attach Legs to Frame
Place one of the Legs (C) into the Long
Frame End (A).
Line up the holes on the Legs (C) with the
holes on the Long Frame (A) end. Insert
four M6 × 10 mm Allen Head Screws (N)
through the holes in the Frame End going
into the Leg and tighten securely with the
supplied Allen Wrench (J).
Repeat for the other side of the Long
Frame.
Place the remaining Leg (C) into the
Short Frame End (B). Attach with four
M6 × 10 mm Allen Head Screws (N).
Attach Side Brackets
Note: The Frame end with the
Control Box bracket should be placed
towards the center of the desk.
Slide the Left and Right Brackets (D &
E) into the far Frame ends until flush.
Insert two M6 × 14 mm Allen Head
Screws (M) through the holes in the
Brackets and into the Frame.
Slide the Center Bracket (F) onto the
frame end at the center of the desk
until flush and insert two M6 × 14 mm
Allen Head Screws (M) through the
holes in the Bracket and into the
Frame.
Using the supplied Allen Wrench
(L), rotate each screw just a few
turns. After both screws are inserted,
tighten screws securely.
Repeat for all three locations.
2
1
B
C
A
N
N
N
C
C
To avoid stripping the threads, always
insert and make the first few turns
of the screw BY HAND with an Allen
wrench (H), ensuring it is in straight.
N
M6 × 10 mm Allen
Head Screw
M
M6 × 14 mm Allen
Head Screw
Hardware at actual size
Hardware at actual size
Note:
Control Box Bracket
towards center of desk
D
F
E
M
M
M
Note: Legs are shown without
cables for clarity.
