Power on:
connect the battery that needs to be discharged.
Turn on:
short press any key, bright white light, standby state.
To set the battery cells count:
press the right button, and the number
circulates from 2S to 8S progressively. The white light turns on from left to
right progressively with each press.The first light and fourth light on
at the same time is 7S, the first light and fifth light on at the same time is 8S.
To set the current:
press the left button to turn the light purple (red + blue).
NOTE: a single light from left to right indicates the current is 5A, 10A, 15A,
20A and 25A respectively.
Bluetooth connection:
long press the left and right buttons at the
same time, the light will turn blue and blink, indicating the FD-200 is
ready to be paired. Turn on the bluetooth of the mobile phone.
After the connection is successful, the light will turn white.
(NOTE: A connection timeout returns the FD-200 to standby state.)
Discharge mode:
(1) manually start discharge: long press any key until the light turns green,
indicating the start of discharge.
(2) automatic discharge: when the mobile phone is connected by bluetooth,
the automatic discharge is turned on, and it waits for 5 seconds in
standby state before automatically entering the discharge state.
Standby:
Press any button twice during discharge to switch the current or
the number of cells (NOTE: The FD-200 will start for working three seconds
after switching), or long press any button during discharge and the FD-200
returns to standby state
Power off:
After discharge or standby state, wait for one minute automatic power off.
Operation Guide
•
•
•
•
•
•
•
•
