ISDT C4 evo, User Manual

Page: 10 / 14

Model:
Max. Input Power:
Support Battery Count:
Support Battery Size:
Support Battery Type:
Operating Voltage Range:
Charging Current Range:
Discharging Current Range:
Operation Modes:
Display:
Beep Sound:
Temperature Sensors:
Operating Temperature:
Reverse Polarity Protection:
Overheating Protection:
Overcapacity Protection:
Dimensions:
Weight:
* The maximum lateral length of the batteries is 70mm
C4 EVO
36W
1~4 Cylindrical batteries
AAA, AA, 10440, 10500, 12500, 13500, 14500,
14650, 16650, 17650, 17670, 18650, 18700,
20650, 20700, 21700, 22650, 26650, 26700
NiMH, NiZn, Lilon, LiFe, LiHv
5~12V (Supports QC, PD protocol)
0.1~3.0A (Horizontal), 0.1~1.5A (Vertical)
0.1~1.5A (Horizontal), 0.1~1.0A (Vertical)
Charge, Discharge, Storage, Destroy,
Cycle, Activate, Analyse
320×240 IPS LCD
Multi-tone
6
0~40°C
Vertical physical anti-reverse polarity connection and
horizontal anti-reverse polarity connection hardware
Supported
Supported
120×92×34mm
About 195g
Specification
Using this charger, either four AA or AAA batteries or one 16650~21700 and one
16650~26700 battery can be charged, discharged, storaged, cycled, analyzed,
activated and destroyed in a variety of combinations.
Task Setting
Automatic Mode
1.
2. Connect a Type-C to the C4 EVO power input port.
After inserting the battery into the slot correctly, the charger detects the battery,
and the display will change from the standby page to the task setting interface.
The buzzer will sound once every 1.5 seconds.
If the user does not respond within 5 seconds
and perform an operation, the charger will
automatically start charging.
The display will show the following charging
status, as shown below:
NiMH
00:13:25
NiMH
00:06:19
NiMH
00:02:12
----
00:00:00