ISC GC-PM 46/1 S, Operating Instructions Manual

Page: 30 / 162

28
GB
10. Faults and remedies for faults
Caution: Always switch off the engine and pull the ignition cable before starting any inspection or adjustment
work.
Caution: If, after making an adjustment or repair to the engine, you let it run for a few minutes, remember that
the exhaust and other parts will get hot. Thus, do not touch parts that emanate heat, as these may burn you.
Important. If problems arise in connection with the engine, please refer to the enclosed manual from
Briggs & Stratton.
Fault Possible cause Remedy
Loud while running, machine
vibrates heavily - Screws are loose
- Blade fasteners are loose
- Blade is unbalanced
- Check screws
- Check blade fasteners
- Replace blade
Engine does not start - Brake lever not pressed
- Fuel tank is empty
- Press brake lever
- Refill with fuel
Uneven mowing results - Blade is blunt
- Cutting height is too low
- Sharpen the blade
- Set correct height
Unsatisfactory bagging of the
grass
- Cutting height is too low
- Blade is worn
- Basket is clogged
- Set correct height
- Replace the blade
- Empty the basket
Anleitung_GC_PM_46_1_S_BS_SPK7__ 24.10.13 08:48 Seite 28