IS5 COMMUNICATIONS MicroRAPTOR iMR920 Quick Start Manual Download Page 34

Page: 34 / 65

HAPTER

OMMAND

INE

: U

PGRADING

THE

ICRO

RAPTOR

9. Command Line: Upgrading the MicroRAPTOR

This section will document how to upgrade the firmware on the MicroRAPTOR. This process takes

approximately 5 minutes to execute.

REREQUISITE

To perform the tasks in this section, you will have already logged into the MicroRAPTOR via an

SSH

connection or through the console port. For all upgrades it is recommended that user’s backup their

current running configuration prior to commencing the upgrade process.

Valid Upgrade Paths

If the release that your device is running is not listed on the table below, it is recommended that the

support team is contacted for more detailed instructions.

Table 1:

Upgrade Paths

Model

Initial Release

Target Release

iMR920

1.10.06 is the initial release

iMR920

1.10.06

1.11.06

iMR920

1.10.06

1.12.05

iMR920

1.11.06

1.12.05

iMR920

1.11.06

1.13.05

iMR920

1.12.05

1.13.05

Summary of Contents for MicroRAPTOR iMR920


































































Search results

Summary of Contents for MicroRAPTOR iMR920

Reviews:

Related manuals for MicroRAPTOR iMR920

Brands by name

Popular brands

IS5 COMMUNICATIONS MicroRAPTOR iMR920, Quick Start Manual

Search results

Summary of Contents for MicroRAPTOR iMR920

Reviews:

Related manuals for MicroRAPTOR iMR920

Brands by name

Popular brands