16
C
HAPTER
6
C
OMMAND
L
INE
: IP A
DDRESS
C
ONFIGURATION
6. Command Line: IP Address Configuration
This section will document the configuration of an IP Address and a default route.
P
REREQUISITE
:
To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the console
cable or through
SSH
.
Speak with your Network Administrator to determine the values of the following parameters:
•
IP Address
•
IP Address Mask
•
Default Route
These values will be needed to configure the MicroRAPTOR.
1.
Configure the IP Address.
F
OR
EXAMPLE
:
At the command prompt type:
iS5comm# configure terminal
iS5comm(config)# interface vlan 1
iS5comm(config-if)# ip address <IP Address> <IP Address Mask>
iS5comm(config-if)# no shutdown
iS5comm(config-if)# exit
iS5comm(config)# exit
S
TEP
R
ESULT
:
The IP Address for the MicroRAPTOR has been set.
2.
Configure the default route.
F
OR
EXAMPLE
:
At the command prompt type:
iS5comm# configure terminal
iS5comm(config)# ip route 0.0.0.0 0.0.0.0 192.168.32.254
iS5comm(config)# exit
S
TEP
R
ESULT
:
The default route has been set to
192.168.32.254
.
