UM-G-iSG18GFP-4.5.06.1-EN.docx
1
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
About the Document
1.1 iSG18GFP Overview
The iSG18GFP is an intelligent 18 port compact Service-Aware Ethernet switch, IEC 61850-3 and IEEE 1613
compliant which is designed with a unique strong packet processing application-
aware engine to fit the most critical
industrial application. The optional support of an integrated firewall on every port of the iSG18GFP provides a
network-based distributed security. The switch also contains a VPN gateway with 2 operational modes: inter-site
connectivity using IPSec tunnels and remote user access via SSH.
The iSG18GFP is a natural fit for installation at MV/LV transformer sites acting as secure access points for the
Distributed Automation control of remote sites. This product is as a secure gateway for Ethernet, IP, and Serial
services as an optimized platform for servicing these needs over the network core. The iSG18GFP provides
maximum protection against cyber threats.
The iSG18GFP can be managed by the iManage Software Suite (iMSS). The product is made of galvanized steel
and has a wide operating temperature from -40°C to +85°C suitable for the harshest of environments without fans.
1.2 Using this Document
1.2.1 Documentation Purpose
This user guide includes the information for installing, configuring and operating the iSG18GFP Ethernet switch. This
document contains Section G of the iSG18GFP user manual. The Section G is the General section of the iSG18GFP
User Manuals. It provides the complete syntax for the commands available in the currently-supported software
version and describes the features supplied with the device.
