IS5 COMMUNICATIONS iSG18GFP, User Manual

Page: 19 / 78

ISG18GFP USER MANUAL, GENERAL, SECTION G
UM-G-iSG18GFP-4.5.06.1-EN.docx 14
© 2020 IS5 COMMUNICATIONS INC. ALL RIGHTS RESERVED
Group Feature GCE ACE
IEEE 802.1X Port Based Network Access Control. X
IPSec X
Local Authentication X
MAC limit X
Port shutdown X
RADIUS Accounting and Authentication X
TACACS X
Time
Local Time settings X
NTP X
Diagnostics
Counters & statistics per Port X
Led diagnostics X
Ping X X
Port mirroring X
Relay Alarm Contact X
RMON X
Trace Route X
Serial Gateway IEC 101/104 gateway
X
IEC 104 Firewall X
Serial Transparent Tunneling X
Terminal Server X
VPN
L2 GRE VPN X
L3 IPSec VPN X
L3 mGRE DM-VPN X
4.4 System Defaults
The following table details the features and interfaces defaults.
Table 7 – Features and Interfaces Defaults
Feature Default state
Ethernet Ports All ports are enabled
Serial interfaces Disabled
Cellular modem Disabled
VLAN 1 Enabled (all ports are members)
Ports PVID All Ethernet ports have PVID 1
POE POE is enabled for supporting hardware
Layer 3 interface Interface VLAN 1 is set to: 10.0.0.1/8
Spanning Tree MST is enabled.
Application ports gigabit 0/3-0/4 are edge ports. Depending on hardware type
ports fast 0/9-0/16 may be edge ports as well (ET28 HW variants)
LLDP Disabled