11
3. Connection and configuration
3.1. Connection
It is necessary to insert a SIM card into the modem before supplying power (it is recommended to use a
SIM card with the removed PIN code). For this you need to:
remove a SIM card tray pressing the eject button (fig. 2.4.1.);
insert a SIM card into the SIM card tray;
insert the SIM card tray into the modem.
Do not apply much force when inserting a SIM card.
Connect a GSM antenna and a switching cable. Supply power to the modem, Micro-FIt connector (fig.
2.4.2). If a SIM card is unlocked, the modem is automatically registered after power supply. As soon as the
registration is complete the modem switches to an operation mode, the indicator blinks (table 2,6.1).
Note:
A GSM antenna, switching cables and a power supply unit are not included.
3.2. Management and turn-off
The modem management is realised by the standard AT commands, as well as by the commands patented
by WAVECOM. Additional information and support can be found on the websites
www.radiofid.ru
or
www.irz.net
.
You can turn off the modem in the following ways:
using software AT commands;
powering off.
