iRZ ion fm, User Manual

Page: 57 / 67

57
4.3.6. “RS-485” tab
The RS-485 is used to configure the RS485 Interface.
The following configurations are available:
Parameter Description
Speed data exchange Operation speed of the RS485 interface, which is presented by fixated values in
baud
Period data saving, sec Time interval in seconds, after which the data from RS485 should be saved
The interface RS485 can function in two modes:
●
Sensor Scanning;
●
CAN-LOG iRZ Online.
Sensor Scanning.
This mode is used for the configuration of the liquid level sensors. The terminal iON FM can work with up
to four sensors, connected through the RS485.
For the configuration of the sensor do the following steps:
Select the type of sensor;
Enter the network address of the sensor.
Fig. 4.8.
“RS-485” tab (“Sensor scanning” mode)