IRTrans Manual Hardware/Setup WiFi Version 1.01
11
Programming the IR Database
(Only for devices with optional IR Database)
Using
Mode – Device database
the integrated IR
Database can be configured using the IRTrans GUI
client.
A remote control is selected with the right mouse
button. Selected remote controls are shown red
and bold. All selected remote controls with all their
commands will be stored in the device database.
The “Default Action” text box defines the string that
will be sent via UDP when an IR command is
received. If the field is empty, only commands with
their own action will be sent via UDP.
The following macros are available:
%r
Name of the remote control
%c
Name of the IR command
%a
Address of the device on the serial bus
Carriage returns can be sent using “\r” and line
feeds via “\n”.
The checkbox “Device DB active“ allows to switch
the IR Database on or off.
Furthermore an individual string can be defined for
each IR Command. After opening the remote
control each command can be selected using the
right mouse button. Now an ASCII or binary string
can be stored. Binary data is stored via 2 digit Hex
codes with a space as a separator (e.g. 20 43 0D
0A).
This string will be send via UDP when the selected
command is received.
In the ASCII mode Carriage Return and Linefeed
can be generated using “\r” and “\n”.
Relay Control is not used with the IRTrans WiFi.
