1100-dds_ib_rev0.doc
Page 6 of 9
06/10/2009
Operation
Front panel control:
Press desired OUTPUT A, B, C or D, then press which input that is to be switched to that output.
For example, suppose the requirement was for input 1 to go to outputs C and D, input 2 was to go to output B and
input 8 was to go to output A.
In any order, momentarily press:
OUTPUT A followed by INPUT 8;
OUTPUT B followed by INPUT 2;
OUTPUT C followed by INPUT 1; and
OUTPUT D followed by INPUT 1.
The front panel switches have a red LED which illuminates when the pushbutton is pressed. Pressing any of the
OUTPUT switches will show what INPUT switch has already been set to match. To reset simply press another
desired INPUT.
