3810-rwt.ib.rev1.doc
Page 5 of 11
17/10/2007
RWT-3810 / RWR-3810 Technical specifications
RF signal connections
75 ohms SMC on rear connector panel. (BNC and F
adapters provided.)
RF input level
Adjustable in the range
-40 dBm to –20 dBm total power.
RF output level
Adjustable in the range
-45 dBm to –20 dBm total power.
Input / output VSWR
<2:1 (75
Ω
/ 50
Ω
).
System 3rd order intercept (IP3)
>+10 dBm.
System frequency response
900 MHz to 2050 MHz operation
500 MHz flatness
± 1.5 dB
36 MHz flatness
± 0.5 dB
System group delay
± 2 ns, 900 MHz - 2050 MHz
Carrier to noise
>26 dB for 36 MHz bandwidth
Inter-modulation products.
< 40 dBc.
Optical output power
-7 to -10 dBm.
System optical budget
> 4 dB.
Optical signal connections
SC angle faced (accessible from the rear of the
module) for use with single mode (9/125
µ
m) fibre
cable.
LNB Power
13V or 18V input to RWT-3810 rear panel, SK3.
Power requirement
14V-0-14V AC /3.5 VA
Temperature range
0 - 45° C ambient
Mechanical
6 HP x 3 U x 220 mm IRT Eurocard
Suitable for mounting in IRT 19" rack chassis.
Fibre, RF & alarm connections at the rear.
Finish:
Front escutcheon
Grey with black lettering & red IRT logo
Rear assembly
Detachable silk screened PCB with direct mount
connectors to Eurocard and external signals
Standard accessories
Matching control connector is supplied with the TX
module, and RF adapter connectors for conversion
to BNC and F is supplied with both modules.
Optional accessories
TME-6 module extender card
NOTE:
All the parameters specified are only applicable when using single mode (9/125
µ
m) fibre cable with a
return loss of >= 27 dB.
Due to our policy of continuing development these specifications are subject to change without notice.
IRT
Communications
www.irtcommunications.com
