4230-mmm & 4230-mmx.ib.rev4.doc
Page 2 of 17
17/10/2007
IRT Eurocard
Types MMM-4230 & MMX-4230
4 Channel ASI to G.703 Multiplexer/De-Multiplexer
Instruction Book
Table of Contents
Section Page
Operational Safety
2
General Description
3
Technical Specifications
4
Configuration 5
Link settings
5
Switch settings
6
45 Mb version
6
Variable Bandwidth – Channel Allocation Selection A
7
34 Mb version
8
Installation 9
SMU-4000 Installation
10
Figure 1: SMU-4000 module
10
RS-422 pin assignments
11
The RS-422 standard
12
Front and rear layouts
13
SNMP – What Is It?
14
Maintenance & Storage
16
Warranty & Service
16
Equipment return
16
Drawing List Index
17
This instruction book applies to units later than S/N 0504001.
Operational Safety:
WARNING
Operation of electronic equipment involves the use of voltages and currents that
may be dangerous to human life. Note that under certain conditions dangerous
potentials may exist in some circuits when power controls are in the
OFF
position.
Maintenance personnel should observe all safety regulations.
Do not make any adjustments inside equipment with power
ON
unless proper
precautions are observed. All internal adjustments should only be made by suitably
qualified personnel. All operational adjustments are available externally without the
need for removing covers or use of extender cards.