14
- CONTINUED
SETTING THE SAME WATERING TIME
FOR ALL STATIONS
Use this feature to set the same watering time for all stations using a
single entry. This feature applies to all stations within the same program.
1. Select the desired program, A or B.
2. Set the dial to the All Stations Watering Time position.
3. Press the On A button to increase watering time, the Off
button to
decrease watering time.
4. Press both
Advance
buttons at the same time to enter. The display will
flash to indicate the entry was accepted.
DELETING A PROGRAMMED STATION
To
delete a programmed station, set watering time to zero (0)
SELECTING THE DAYS TO WATER
The Dial Series controller has a 14-day watering schedule
(6-day schedule instructions are listed in Advanced Features,
page 21). Table 1 below shows the numbers corresponding to the
days of the week. To program the watering days, refer to table 1
and the steps below.
Table 1. Watering Days Schedule
SUN MON TUE WED
THU FRI SAT
1st Week: 1 2 3 4 5 6 7
2nd Week: 8 9 10 11 12 13 14
- CONTINUED
1. Select the desired program, A or B.
2. Set the dial to the Watering Day Schedule position.
3. Press the
Advance A
or
Advance
buttons until the desired day of
the week is displayed.
4.
Press the
On A
button to schedule a day on, the Off
button to
schedule a day off.
DISPLAYING PROGRAMMED WATERING DAYS
To display the watering days without changing them, do the following:
1. Select the desired program, A or B.
2. Set the dial to the Watering Day Schedule position.
3. Press the
Advance A
or
Advance
buttons repeatedly.
The controller displays the days on and days off. For example, the
display “1:ON” indicates Sunday of the first week is a scheduled day
on; “8:OF’ indicates Sunday of 2nd week is not a watering day.
NOTE: OF = OFF.
DELETING A PROGRAMMED
WATERING DAY
If you make a mistake or want to delete a programmed day on, do the
following:
1. Set the program switch to the program with the day to be deleted,
A or B.
2. Press the
Advance A
or
Advance
buttons until the desired day of
the week is displayed.
3. Press the Off button to schedule a day off.
4. Repeat for all watering days to be deleted.
Programming the Controller for Watering
15
