-16-
Note:
Before you start the AUTO-SEARCH, please set the SOUND/COLOR
as the corresponding local systems. Or, the channel program may
have no audio or have cacophony while the image may have no colour.
SWAP: Press or to select this entry. Press / to change
it to your required channel. To confirm, press or .
FINE: Use this entry to adjust the channel for perfect signal quality
when the signal quality is poor.
SEARCH: This entry is used to control the current channel. When
you SEARCH a signal in this way the receiving indication frequency
will stop. This indicates that a perfect position for you to save a
channel. If the channel features a poor signal quality, the system
will identify it as no signal.
SOUND-SYS: Press / to switch among
I
,
DK
and
BG
in turn.
1. SOUND-SYS description:
I
refers to 6.0 M,
DK
6.5 M and
BG
5.5 M. Please set the system to the local SOUND-SYS.
2. COLOR-SYS description:
A. For your selection of
I
mode, the COLOR-SYS refers to PAL-I;
B. For
DK
, the system refers to PAL-DK or SECAM-DK;
C. For
BG
, it refers to PAL-BG or SECAM-BG;
D. For
DK
, it refers to SECAM-L.
3. For images without audio or with noise, check whether the audio
system is set properly.
Note
COLOR-SYS: Press the / button to switch among PAL, NTSC
and SECAM in turn.
If the signal intensity is very poor or too weak, ill images would still
occur with strong noise, swing and bad audio effect no matter how
you adjust the antenna. This is not the failure of your TV. Try an open
antenna or a cable TV if the telescopic antenna does not work.
Note