12
CONNECT DVD PLAYER TO OTHER
APPLIANCES
y
It is recommended you connect the player to a
multi-system TV.
y
Ensure that this player and other appliances (TV set and
amplifier) that will be connected to the player are set to
OFF mode and that the AC cords are disconnected from
the wall outlet.
y
Avoid blocking ventilation holes of the connected
appliances and make sure air around there can circulate
freely.
y
Read carefully and follow the instructions before
connecting other appliances.
y
Ensure that you observe the color coding when connecting
audio, video cables. If the RCA adapter is supplied only, the
audio/video RCA cable is required. Plug one end of the
RCA adapter to the unit. Then connect the audio/video
RCA cable to the RCA adapter and the television.
AUDIO R AUDIO L VIDEO IN
S-VIDEO
YUV INPUT
AV AUDIO/VIDEO INPUT
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that
have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use
in 24V vehicles.
CAUTIONS:
y
Use the unit only with the recommended car power adaptor,
use with other car power adaptor might damage the unit.
y
The recommended car power adaptor is for use with this
unit only. Do not use it with other equipment.
y
In the interests of road traffic safety, do not operate the unit
or view video software while driving a vehicle.
y
Make sure the unit is fastened securely to prevent from
moving outside of the vehicle in an accident
.
y
When the inside of the cigarette lighter socket is dirty with
ashes or dust, the plug section may become hot due to
poor contact. Be sure to clean the cigarette lighter socket
before use.
y
After use, disconnect the car power adaptor from both the
unit and cigarette lighter socket.
FUSE REPLACEMENT
FUSE
PO) CAP
NOTE: Don't throw out the po) cap when replace the
fuse.
CHARGE THE BUILT-IN BATTERY
The player is with a rechargeable lithium battery. Before using
the battery, please make sure it is charged. If not, charge it
first. Slide the power switch to OFF position and then connect
one end of the supplied adapter to the wall outlet and the
other end to the unit for charging the built-in battery.
Note:
1. The battery only could be charged at powering off mode.
2. If the unit is not in use for a prolonged period of time, it is
recommendable to charge the built-in battery each three
months.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Slide POWER switch to turn on the player.
2. Press disc cover open key to open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray by hand and the playback starts
automatically.
5. When a menu screen appears on the TV, press the
navigation buttons or press the numeric buttons to select a
preferred track number, then press OK button to start
playback.
NOTE: During playback, if not any operation in about 4 hours,
the unit will switch off automatically.
ADJUST THE VOLUME
Press /- button on the remote or press and hold
/- button on the unit to increase or reduce the
volume.
MUTE
While the power is on, the audio output of the main unit is to
be shut off by pressing the button. Press it again to resume
sound output.
SKIP AHEAD OR BACK
Press PREVIOUS button during play to skip previous chapter
(DVD) or a track (CD), Press NEXT button during play to skip
next chapter (DVD) or a track (CD).
RAPID ADVANCE/REVERSE
During playback, press and hold F_FWD button or F_BWD
button to scan the disc forward or backward at X2, X4, X8,
X20 normal speed.
Press PLAY button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the
player activates its resume function when STOP is pressed in
STOP mode; press PLAY/PAUSE button again, playback
resumes at the point it stopped previously; open the disc tray
or press the STOP button one more time to clear the resume
function.
A/V cable
TV SET
To the cigarette lighter socket
