HANDLING AND MAINTENANCE OF A DISC
Follow the instructions below to handle and maintain your disc in
order that long time and trouble free performance can possibly be
obtained:
Ensure not to caress the rain bow side of the disc; handle the
disc by the edge.
Long time exposure to sunshine, high temperatures and
humidity will damage the disc. And keep storage area clean.
Avoid sticking labels on both sides of a disc. Writing with
pointed articles on the disc should be strictly avoided.
Clean the disc wiping the centre and then working out to the
edge with a dry & soft cloth or a disc brush. Avoid any
cleansing lotion or chemical eradicator.
Store them in their cases when they are not to be used.
LOAD A DISC
1. Open the CD door by the Door open area.
2. Load a disc on the disc tray with the label side facing up.
3. Close the CD door.
PLAY A DISC
1. Slide the Function switch to CD/USB/AUX position.
2. Follow the steps above to load a disc.
3. The player begins reading disc immediately.
4. When the disc is successfully read, TOC (total of contents) shows in the LCD and
playback follows with the first track.
5. Press Play/Pause button once to halt music playback, the track number flashes to
indicate the player in Pause mode; press Stop button to cease music playback. The LCD
shows the TOC again.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY (CD)
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip to
a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to skip to the previous track. To
skip to a specific track at back, press this button several times.
3. Press 10+ button once in play to skip to the track 10 tracks ahead, twice to skip to the
track 20 tracks ahead. You can reach the last track of the disc using this button.
4. Hold the SKIP/SEARCH up button in music play to search at quick rate for a specific point
to play.
5. Hold the SKIP/SEARCH down button in music play to search at quick rate for a specific
point to play.
PROGRAMMED PLAY (CD/USB/MP3)
Programmed play is that tracks on the disc or on the USB can be edited for playback in a
preferred order with the use of PROGRAM button.
In stop mode, press PROG. button once, the program sequence indication "P01" flashes
once with "PROG" icon in the LCD. Then a flickering track number shows in the LCD with
"PROG" waiting for your input, select the first track to be programmed using SKIP/SEARCH
buttons or 10+ button, and press PROGRAM button again to store and advance to the next
programming step. The program sequence indication changes to "P02" waiting for your next
input.
Repeat the steps above to program more tracks. A maximum of 20 tracks for CD and 99
tracks for USB&MP3 can be programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are
done with programming. The player stops automatically after all programmed tracks are
played.
You may press STOP button to terminate programmed playback. In program stop mode,
press STOP button again to clear the programming; press PLAY/PAUSE button to begin the
programmed playback with the programming order identical with the previous one done.
MP3-CD PLAYBACK
This player is capable of MP3-CDs. It takes longer time for this player to read an MP3-CD
than it does CD-DA. Wait patiently while it is reading.
After an MP3-CD is successfully read, the total tracks number shows in the LCD. And a
second later, playback begins from the first track of the first album with the icon of
"Mp3"showing on the screen.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip to
a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to skip to the previous track. To
skip to a specific track at back, press this button several times.
3. Press 10+ button once in play to skip to the track 10 tracks ahead, twice to skip to the
track 20 tracks ahead. You can reach the last track of the disc using this button.
4. Hold the SKIP/SEARCH up button in music play to search at quick rate for a specific point
to play.
5. Hold the SKIP/SEARCH down button in music play to search at quick rate for a specific
point to play.
REPEAT A SINGLE TRACK (CD/USB/MP3)
To repeat a preferred track in playback, press MODE button once, the corresponding icon of
repeat a single track shows in the LCD. Then select the preferred track using SKIP/SERCH
buttons or 10+ button. The player will repeat the chosen track until you press STOP button.
REPEAT ALL TRACKS (CD/USB/MP3)
To repeat all tracks, press MODE button twice in play mode, the corresponding icon of
repeat all tracks shows in the LCD. The player will repeat all tracks until you press STOP
button.
RANDOM PLAY (CD/USB/MP3)
Random play is that tracks on the disc are played by the player at random. Press MODE
button three times to enter this mode during play, the icon of random play shows in the LCD.
Tracks on the disc will be selected at random for playback and the player stops
automatically after all tracks are played. You may press STOP button to exit random play
HANDLE DISC ONLY AS SHOWN
CLEAN FROM CENTER TO EDGE
DO NOT STORE NEAR HEAT
