13
12
14
15
LOCK SWITCH
Slide the
LOCK
switch to the direction shown on the unit -
the lock symbol [ ] will appear on the display meaning
that all of the unit’s operation keys are locked.
PRECAUTIONS
This product is engineered to give you years of satisfactory
service if handled carefully. Here are a few precautions:
* Do not immerse the unit in water.
* Do not clean the unit with abrasive or corrosive materials.
They may scratch the plastic parts and corrode the
electronic circuits.
* Do not subject the product to excessive force, shock,
dust, temperature, or humidity, which may result in
malfunctions, shorter lifespan, damaged batteries, and
damaged parts.
* Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty and may cause
damage. The unit contains no user-serviceable parts.
* Use only fresh batteries.
* Read the user's manual thoroughly before operating
the unit.
* Adjust the hour by pressing the
DOWN
(-) or
UP
(+)
buttons. Press and hold (-) or (+) buttons for faster
digits adjustment.
* Press the
ALARM
button to confirm the Alarm time.
* Press the
DOWN
(-) button to activate the Alarm: an
icon [ ] will appear on the display above the alarm
time with the word “
ON
” below the alarm time
* Repeat the same procedure to set a Single Alarm,
selecting it by pressing the
UP
(+) button. If the Single
Alarm is off, the default alarm time “
8:00 OFF
”
with will be displayed.
DISABLING THE ALARM
* Press the
ALARM
button to enter into the desired
ALARM
mode
* Press the
DOWN
(–) button to disable the selected alarm.
The icon [W or S] will disappear from the unit’s display.
SNOOZE/LIGHT
When the alarm sounds, press the
SNOOZE/LIGHT
button to temporarily stop the alarm and activate the
backlight for 5 seconds. After the
SNOOZE/LIGHT
button is depressed, the alarm sound will resume in five
(5) minutes.
NOTE:
If the battery power is low, the backlight cannot
be activated. So, the battery needs replacement.
INDOOR TEMPERATURE
The indoor temperature shares the same display’s line with
time. The temperature reading is updated every minute.
NOTE
: If the indoor temperature goes above or below
the operating range stated in the specifications, the
display will show “
HH
” or “
LL
” respectively.
Press the
°
C/
°
F
button to select the temperature in
Celsius or Fahrenheit.
INTERFERENCE
The radio signal reception can be affected by a number of
different factors - from surrounding building materials
to the weather conditions.
For the optimum reception please consider that:
* During the night-time hours atmospheric disturbances
are typically less severe and radio signal reception may
improve. A single daily reception is sufficient enough to
keep the clock accuracy within 1 second.
* Make sure the unit is positioned at least 8 feet (2 meters)
away from any interfering source such as a TV, computer
monitor, microwave, etc.
* Within concrete wall rooms such as basements or office
buildings, the received signal may be weakened. Always
place the Clock near the window for better reception.
ALARMS
The International Travel Clock has two alarms –
Weekly [ ] and Single [ ]. If either of the alarms
is activated, it will sound at the set time and the alarm
icon will flash Mondays through Fridays.
SETTING THE ALARM
To set any alarm,
* Press the
ALARM
button to
select the
ALARM
mode. The
default setting is the Weekly
Alarm. If the Weekly Alarm is off,
the icon along with “
OFF
” will be displayed.
* Press the
UP
(+) button to select
“
7:00
”, entering into the alarm
time setting mode.
* Press and hold the
ALARM
button for two seconds.
The hour digit will flash.
SPECIFICATIONS
Calendar and Clock
Auto and manual selection of frequency bands for major
countries – US, UK, EUR, SWISS, JPE, JPW
Daylight Savings Time (DST) control
12/24 hour display in HH/MM/SS format
User-selectable date format: month/day or day/month
Dual 2 minute crescendo alarm with 5 minutes snooze
23 World Time Zones control
Enhanced Orange Backlight duration: 5 seconds
Keyboard lock
Indoor Temperature
Mesure range: -5
°
C to +50
°
C/23
°
F to 122
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
User-selectable (F
°
or C
°
) temperature display
Power
1 CR2032 size 3V battery (included)
Battery life – 1 year
Dimensions
3.78(L) x 2.08(H) x 0.24(D) inches
