Customizing your Weather Station
To fully customize the weather station to your local settings and personal preferences, the
following settings are required. Please refer to the appropriate sections for detailed
instructions.
Required:
- Setting Pressure Parameters during Initial Start-Up (Pressure and Weather Forecast
Mode P.15)
- Setting up the Time, Date and Language (Clock and Alarm Mode: P.19)
- Setting up the Location Data (Sunrise/Sunset Mode: P.21 )
Optional:
- Setting up the Time Alarms (Clock and Alarm Mode: P.20)
- Setting up the Temperature Alerts (Temperature and Humidity Mode P.23)
- Setting up the Daily Rainfall Alerts (Rain Mode P.24)
- Setting up the Wind Alerts (Winds Mode: P.26)
LED Backlight Options
The backlight of the main console unit can be turned permanently on/off or automatically
toggled when environment lighting level is low. Use the light sensor switch at the back of
the unit to select lighting preferences.
For the automatic backlight function, the sensitivity of the light sensor can be adjusted to
high or low with the sensitivity switch also on the back of the console unit.
Note: Console unit must be powered with AC/DC adaptor for automatic control function
Linking the Weather Station to a Computer
The Pro X has an internal memory of 3300 complete datasets. Additionally it is equipped
with a USB 1.1 port which allows you to transfer the data to a PC. The SW for the PC you
may download free of charge from the internet. With this SW, and only with this, you may
also define the recording interval for these datasets.
The free download you will find on the following page:
www.irox.ch/software
- Install this Software on your PC
- Any further instruction you will find in with the SW.
- Connect the USB port from your PRO-X2 by the provided USB cable with a free USB port
on your PC.
On the display of your PRO-X2 you will find in the upper middle part of the LCD after the
successful connection a USB symbol.
Summary of Contents for PRO-X2
Page 1: ... USER MANUAL PRO X2 ...
