– Press S3 to show Pulse mode, mode prompt “PULS” will be displayed for
1 second first.
– Press and hold S2 for 1 second (“Hold” displayed) to enter setting mode.
The “Zone High Limit” digits start flashing.
– Press S1 to adjust the flashing digits. Press and hold S1 for fast setting.
– Press S3 to select the next digits or sound on/off for setting. The sequen-
ce is shown as follow:
– When setting sound on/off, press S1 to toggle the zone alarm on or off.
– After all adjustments are completed, press S2 to exit setting mode.
Remarks
1. If zone alarm is set to “on”, 1 “Beep” sound will be given every 6 seconds
when heart rate is below “Zone Low Limit” and 2 “Beep” sounds will be
given every 6 seconds when heart rate is above “Zone High Limit”.
2. Both “Zone High Limit” and “Zone Low Limit” can be set from 40 to 240
BPM (Beat Per Minute).
3. If there is no button operation for 2–3 minutes in setting mode, the watch
will return back to Pulse mode automatically.
=21(+,*+/,0,7
=21(/2:/,0,7
6281'212))
6
6
6
5HR?ENPDF5HR
57
2245_Bedienung_EN 25.5.2005 09:45 Uhr Seite 57
