Install the four Casters to the Bottom.
Position the two Locking Casters (H5) at
the front of the unit, and the two Swivel Casters
(H4) at the back of the unit.
Attach the Casters in place by screwing 16
Panhead Screws (H6) into the pre-drilled holes
from the inside.
Tighten the Flange Lock Nuts (H7) from the
Caster Wheel side to secure the Caster plates to
the assembly as shown.
With the assistance of another person,
set the assembly with the Top (C) down.
Place the Bottom Panel (E) on the
assembly, seating the Bolts into the
corresponding Cams in the Side (A & B)
and Back (D) Panels. Turn all seven
cams clockwise to secure.
#8
E
H3
H3
H3
H6
LOCKING
CASTERS
FRONT
H7
F
#9
With the assistance of another person,
turn the unit upright. Determine the
height for the Shelf (F). Push four Tab-
V Shelf Pins (H8) into the pre-drilled
holes at the chosen height.
#10
Side A/B
H8
