# 1
# 3
# 2
Attach Lower Back
(J) to the Bottom
Shelf (G) using two
Confirmat Screws
(H2). We will call
this the
"Lower
Assembly"
.
# 4
Insert four Minifix Cams (H3) into the
Upper Back (D) with the arrows
facing out.
Insert eight Rafix Cams (H1) into the
Bottom Shelf (G) facing outwards and tap
until fully seated in place as shown.
Important! The edge of the Rafix Cam
must be aligned with the shelf edge.
Rafix Cams are difficult to reposition if
installed incorrectly.
Insert ten Minifix Cams (H3) into the Top (C)
with the arrows facing out.
H3
H2
H1
H3
H3
H3
H3
H3
# 6
# 5
Insert two Dowels (H4) into one end of
each of the four Dividers (L) as shown.
H4
H7
Attach Upper Back (D) to
the Top (C) using two
Confirmat Screws (H2),
being sure that the Cam
holes of the Top (C) are
opposite the Upper Back as
shown. We will call this the
"Upper Assembly"
.
