Insert the Leveler Inserts (H7) into the holes in the bottom edges of each Side. Using
a plastic mallet, tap until flush with the surface. Screw the Levelers (H8) into the
Leveler Inserts.
Adjust Levelers when the assembled unit is in place.
# 5
Screw six Minifix
Bolts (H9) into each
Side (A & B) where
indicated.
Insert four Dowels
(H10) into each side
(A & B) where
indicated.
# 6
Place the Left Side (A) with the
bolts and dowels facing up as
shown. Position the Top (C)
onto the Left Side and turn
cams (H4) clockwise to secure.
Note:
Make sure the front
edges are located as shown.
# 7
H9
H10
