CROSSROADS SHELF
Assembly Instructions
5
NOTE:
Make sure you have the bottom shelf. It will look
like the adjustable shelves except for two additional
screw holes on the back plane.
6. Insert one button head cap screw (G) in
each hole fastening with one nylock nut per
screw (H). Do not tighten (Figure 3).
7. Place the remaining two legs (E) on the
front of the shelf ensuring the holes in both
shelf and legs are aligned. Install screws
and nuts on the remaining two legs. Do not
tighten (Figure 4).
8. Stand the shelf unit upright and install the
remaining shelves, ending with the top shelf
(Figure 5).
NOTE:
Th e top shelf will look slightly diff erent from the
other shelves. Like the bottom shelf, it will have
two additional holes on the back plane. Th e wood-
en top is also a little larger than the steel shelf
frame. Th is will rest on the top of the legs. Ensure
top and bottom shelf back plane holes face the
same direction.
Figure 3
Figure 4
Figure 5
