Page of 12
2
Thank you very much for choosing an IRONTON product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
SPECIFICATIONS
•
Item#: -------------------------- 46176
•
Rated Power: ---------------- 120V~, 60Hz, 2.5A
•
No-Load Speed: ------------- 15,000-22,000 /min (OPM)
•
Oscillations Angle: ---------- 3°
•
Net Weight: ------------------- 3 lbs
Includes: Oscillating Tool, Delta Sanding Pad, 12-Piece Sandpaper Assortment, Rigid Scraper
Blade, Bi-Metal Flush Cut Blade, HSS Segmented Saw Blade, Coarse Tooth Flush Cut Blade and
Accessory Storage Box.
GENERAL SAFETY RULES
WARNING
:
Read and understand all warnings, cautions and operating instructions
before using this equipment. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
WORK AREA SAFETY
•
Keep your work area clean and well lit
. Cluttered benches and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
•
Keep bystanders, children, and visitors
away while operating a power tool. Distractions can
cause you to lose control.
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any
adaptor plugs in any grounded power tools. Double insulated tools are equipped with a
polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet. Do not change the plug in any way. Double
insulation eliminates the need for the three wire grounded power cord and grounded power
supply system.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
