Ironton 73134, Owner'S Manual, Page: 9 / 19

Page 9 of 19
Subassembly
Tension handle (A)
External carbon brush (B)
Auxiliary handle (C)
Motor housing (D)
Speed dial (E)
On/Off switch (F)
Guide bar (G)
Blade (H)
Screw (I)
Guide bearing (J)
LED on/off switch (K)
LED Light (L)
Assembly Instructions
⚠
WARNING
•
Always be sure that the saw is switched OFF before adjusting, adding accessories, or checking a
function on the saw.
Removing and Installing Blades
Removing Blades (H)
1.
To release tension in the blade, rotate the blade tension handle (A) clockwise until it stops.
2.
Turn the saw over and place it on a workbench or table with the cord to the left.
3.
Begin removing the blade (H). When removing the blade, tension may be released and the blade
may spring free. SAW BLADES ARE SHARP. USE CARE IN HANDLING THEM.