Ironton 61457, Owner'S Manual

Page: 4 / 21

Page 4 of 21
Intended Use
The Ironton 6 Inch Benchtop Grinder is designed for general metal grinding and sharpening.
It’s
powered by its 1/2 HP, 120V motor operating at 3560 RPM. The benchtop grinder comes with two
aluminum oxide wheels, each with an adjustable tool rest with eye shields for safety.
Packaging Contents

Benchtop
Grinder

2 Eye Shields

2 Tool Rests

Hardware
Bag

Owner’s
Manual
Technical Specifications
Property Specification
Rate 110V / 60Hz
Motor 1/2 HP
Speed 3560 RPM
Wheel Size 6 x 3/4in.
Arbor 1/2in.
Important Safety Information
⚠
WARNING

Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.

Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.

Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.

Industrial or commercial applications must follow OSHA requirements.
⚠
WARNING
WORK AREA SAFETY

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.