Page 11 of 19
1. Secure the bracket to the wall using the dowels at about 1200mm height appropriate for the tank's
dimensions. Make sure that the wall is solid and thick enough for the dowels. Do not interfere with
hydraulic tubes or electric lines.
2. Secure the pump to the bracket 2.
3. Connect the flexible suction tube 4 to the pump using the clamp provided.
4. Connect the rigid suction 7 to the end of the flexible suction tube 4 using the elastic clamp provided.
5. Put the bung adapter 6 into the drum hole.
6. Put the rigid suction tube 7 into the pump and secure it in place.
•
Depending on the length of the suction tube, choose the desired extension length.
•
Can be decided by using the modular extension elements (see examples above).
•
Remove filter and foot valve from the stub pump, screw the extension tube on (with top
connection), then screw filter and foot valve on the extension tube(foot connection End)
NOTE:
1:1 stub pump's adapter is different than others.
Summary of Contents for 58252
Page 8: ...Page 8 of 19 Main Parts of Pump...
Page 15: ...Page 15 of 19 Parts Diagram...
