Page 4 of 11
Intended Use
The Ironton Truck Winch Quick Mounting Plate handles most vehicle winches with a capacity up to
12000 lbs. Made of welded carbon steel construction, it fits a standard 2 inch receiver tube. This
winch mount makes it easy to install a winch with your existing receiver tube. The durable carbon
steel construction allows your truck to handle winches with capacities up to 12,000 lb.
Property
Specification
Rated Capacity
1,200 Ib.
Construction
Welded Carbon Steel
Receiver Tube
Fits 2” Standard
Important Safety Information
⚠
WARNING
•
Read and understand all instructions. Failure to follow all instructions may result in fire, serious
injury and /or DEATH.
•
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this mounting plate.
Always be aware of the environment and ensure that the tool is used in a safe and responsible
manner.
•
Do not allow persons to operate or assemble the mounting plate until they have read this manual
and have developed a thorough understanding of how it works.
•
Do not modify this mounting plate in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the product. There are specific applications for which the
product was designed.
•
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. The
tool will be a safer and do the job better at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
⚠
WARNING
This winch may contain chemicals known to the State of California to cause cancer, birth defects or
other reproductive harm.
⚠
WARNING
WORK AREA SAFETY
•
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the mounting plate in confined work
areas may put you dangerously close to other cutting tools and rotating parts.
•
Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the mounting plate.
