IMPORTANT SAFETY CONSIDERATIONS
USE AND CARE
•
Do not modify the Metal Detector
in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific applications
for which the Metal Detector was designed.
•
Always check of damaged or worn out parts before using the Metal Detector.
Broken parts
will affect the Metal Detector operation. Replace or repair damaged or worn parts immediately.
•
Store idle Metal Detector
. When Metal Detector is not in use, store it in a secure place out of
the reach of children. Inspect it for good working condition prior to storage and before re-use.
•
The search coil IS waterproof but the control housing is NOT waterproof
. Do not
submerge under water.
ADJUSTING THE STEM
Follow these steps to adjust the metal detector’s stem.
1. Turn the stem’s lock nut clockwise until it loosens.
2. Lengthen or shorten the stem so when you stand upright with the detector in your hand, the
search coil is level with and about 1/2 to 2 inches above the ground with your arm relaxed at
your side.
3. Turn the stem’s lock nut counter clockwise to lock it in place.
ADJUSTING THE SEARCH COIL
Loosen the knobs at the search coil’s end, then adjust the search coil to the desired angle. (The
search coil should be parallel with the ground.) Tighten the knobs just enough to keep the search
coil from rotating or wobbling.
INSTALLING BATTERIES
You will need six AA batteries to power your detector.
Page of 11
3
